- Style:
- Disposers
- Height:
- 13 inches
- Width:
- 6 inches
- Depth:
- 5 inches
1/3-HP motor
Grind food faster and minimize clogging with a 1/3 HP garbage disposal that reaches its maximum spin speed in no time. This is the recommended high-speed disposal for a family of 1-2 people.
Over 2,300 RPM
Always reliable, this over 2,300 RPM food disposal finely grinds tough foods like cooked pasta, fruit peels, rice and cereal
Easy Installation
This DIY, easy installation food disposal only requires a few steps and has everything you need included in the box.
CAPACITY | |
Unit Capacity | 25 oz hopper |
APPEARANCE | |
Color Appearance | Black |
WARRANTY | |
Labor Warranty | Limited 1-year entire appliance |
Parts Warranty | Limited 1-year entire appliance |
Warranty Notes | See written warranty for full details |
POWER / RATINGS | |
Volts/Hertz/Amps | 120 V; 60 Hz; 4.0 A |
Power Connection | Direct Wire |
ECONOMICAL / QUIET | |
Quiet Package | Standard |
ACCESSORIES | |
Sink Flange Kit | Stainless Steel |
3 Bolt Mount Adapter Kit PM3X214 | Included |
WEIGHTS & DIMENSIONS | |
Dishwasher Inlet Diameter | 0.75 in |
Overall Height | 12.6875 in |
Approximate Shipping Weight | 9 lb |
Overall Depth | 5.1875 in |
Net Weight | 8 lb |
Drain Outlet Diameter | 1.5 in |
Overall Width | 5.5 in |
FEATURES | |
Precutter Material | Galvanized Steel |
Motor Horsepower | 1/3 hp |
Hopper (grind chamber) material | Glass Reinforced Nylon |
Armature Shaft Material | Cold-Rolled Carbon Steel |
Feed Type | Continuous |
Grinding Speed (RPM) | 2300 RPM's |
Mounting Type | EZ Mount |
Control Type | Wall Switch |
Disposer Features | 2 Level Precutter Drain Connector Drain Elbow DrainPurge Technology Manual Reset Overload Protector Sink Stopper Splash Guard - Non-Removable |
Grinding Ring Material | Galvanized Steel |
Impellers | Dual Swivel Jam Resistant Stainless Steel |
Turntable Material | Galvanized Steel |
Part Type | Continuous Feed Disposers |
Installation Instructions | Click here to download |
---|---|
Quick Specs | Click here to download |
Use and Care Manual | Click here to download |
Enter Your Review:
Fields marked with an asterisk (*) are required.
Like Replacement
Submitted 02-19-22
done Yes, I would recommend this to a friend
www.ge.com
Newer model fit without needing piping changes. Comes with all the parts you need sans tools.
Love it
Submitted 05-11-21
done Yes, I would recommend this to a friend
www.ge.com
I just replaced my GE GFC320F with the newer model. My other model was17 yrs and used a lot. Was very satisfied with it so bought the same model !
Lasted only 2.5 years
Submitted 04-11-21
clear No, I would not recommend this to a friend
www.ge.com
I changed my old device after five years of use. I bought the same brand an model, GE GFC320N, expecting to have it for another five years but it only lasted 2.5 years. I bought it again just because I am too busy to make the piping changes to replace this product for another brand. However, if this one doesn't last at least five years it will be the last product that I will buy from GE.
Great
Submitted 04-03-21
done Yes, I would recommend this to a friend
www.ge.com
This updated model for the 320F I had for 15 years; seems to be just as good. Time will tell of course. Install was very easy after watching a how to video. It took me just under an hour, but if i did this regularly I'd say 30-45min install as long as pbc pipes are in good condition, which i did remove and cleaned for good measure. Keep in mind you will have to reuse power chord from old disposal or buy new, and reuse insert ring for wiring to go through.
Great Features Overall!
Submitted 03-25-21
done Yes, I would recommend this to a friend
www.ge.com
This is a good disposal system. The only issue I have is it make a weird sound when starting.
CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
There was a problem submitting the form.
Please correct the following errors and try again.
Product Inquiry Form
Fields marked with an asterisk (*) are required.